At ISE we pride ourselves on providing Excellent Customer Service and Support for our entire product line.
site) the following products (we can even provide install and start-up of our competitors products too):
site) the following products (we can even provide install and start-up of our competitors products too):
Note: The service detailed above is typically sufficient for the majority of motors. Upon receipt & examination other service as detailed below may be
required. Customer will be advised if additional service is required. The prescribed service will not proceed until approved.
- 01-2001 SM-3 Re-work Parts (Motor Shaft "Rotor")
- 01-2004 SM-3 Re-work Parts (Windings)
- 29-3700 SM-3 Re-work Parts (Top Housing/Cap)
- 29-3650 SM-3 Re-work Parts (Shield)
- Motor to be fully decontaminated prior to shipment to ISE
- SM-3 to be shipped prepaid. Customer responsible for all freight
- Ship date: Typically 7-8 business days after motor is received
- Warranty 6 months.
- Warranty 6 months
- Process Tools including robotics (Linear, auto transfer arms etc.)
- YES (Yield Engineering Systems, Inc.) Process equipment and parts
 | |  | |  | |  | |  | |  | |  |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Integral Systems Engineering, Inc.
| SERVICES / INSTALLATION |
| CUSTOMER SUPPORT |
ISE
1244 Commerce Ave
Woodland, CA 95776
tel 530.757.1517
fax 530.757.2008
1244 Commerce Ave
Woodland, CA 95776
tel 530.757.1517
fax 530.757.2008
Call: 530.757.1517
For additional
information on any of
our products or
services please
contact us @
info@iseint.com or call
530.757.1517
(8:30AM-5PM PST)
information on any of
our products or
services please
contact us @
info@iseint.com or call
530.757.1517
(8:30AM-5PM PST)
Complete Service (on-site or at our factory) for Lufran/Process Technology UPDI Teflon DI Water heaters as follows:
PM Service Includes:
Replacement of the following:
Testing, Q.C. as follows:
Warranty - 1 year Parts and Labor
Other services includes:
Complete Service (on-site or at our factory) for Lufran/Process Tytan/Hot Shot DI Water heaters as follows:
PM Service Includes:
Replacement of the following:
Testing, Q.C. as follows:
Warranty - 1 year Parts and Labor
Other services includes:
PM Service Includes:
Replacement of the following:
- Power Board Fan Brush-less
- Pressure Transducer / Guage Isolator Assembly
- Process Type J, Thermocouple
- Gauge, Pressure, Indicator
- Additional parts/components as needed.
Testing, Q.C. as follows:
- Verify Process Controller calibration.
- Visual inspection and verification of functionality of safety interlocks.
- Inspection of all plumbing connections.
- Inspection Humidistat switch.
- Inspection of internal wiring
- Inspection of pressure switch.
- Process Controller tuning.
Warranty - 1 year Parts and Labor
Other services includes:
- Replacement of Lufran/Process Technology UPDI Teflon Ultra-Pure Water Heater Column
- Rebuild (to new performance) Lufran/Process Technology UPDI Teflon Ultra-Pure D Water Heaters
- Product training, on site start-up
Complete Service (on-site or at our factory) for Lufran/Process Tytan/Hot Shot DI Water heaters as follows:
PM Service Includes:
Replacement of the following:
- Heater control relay (2 types)
- Fans
- SSR w interface pad
- Additional parts/components as needed.
Testing, Q.C. as follows:
- Verify Process Controller calibration.
- Visual inspection and verification of functionality of safety interlocks.
- Inspection of all plumbing connections.
- Inspection of internal wiring
- Inspection of pressure switch.
- Process Controller tuning
Warranty - 1 year Parts and Labor
Other services includes:
- Replacement of Lufran/Process Technology Tytan/Hot Shot Heater elements.
- Rebuild (to new performance) Lufran/Process Technology Tytan/Hot Shot DI Water Heaters
- Product training, on site start-up.
New! Now available from ISE is sales and support of the Lufran / Process Technology LTFE - High
Temperature Filter Etch Bath. ISE has distributed, installed and serviced Lufran LTFE High Temperature Filter
Etch Bath's since 1993
The Lufran LTFE High Temperature Filter Etch Bath was designed for use H3P04, SC1, SC2, KOH etc. to 180
Celsius and features:
Process Control Package
Available components/services include but are not limited to:
Future components to be offered include:
Temperature Filter Etch Bath. ISE has distributed, installed and serviced Lufran LTFE High Temperature Filter
Etch Bath's since 1993
The Lufran LTFE High Temperature Filter Etch Bath was designed for use H3P04, SC1, SC2, KOH etc. to 180
Celsius and features:
- 2 ea. 4, 5 or 6" or single 8" wafer cassette capacity
- 360 degree, PFA Teflon overflow weir w/ leveling feature.
- Inner Molded PFA Teflon Tank.
- PTFE Teflon Heater with patented (patent numbers 4,553-024-4,158 764) N2 purge feature.
- 208 VAC, single phase.
- 4.5 kW Teflon Immersion Heater.
- 2 ea. J-type over-temperature thermocouple, thermal cutoff switch
- 1 ea. Teflon process thermocouple i) Liquid level sensor
- All Teflon pump with 1⁄2 hp water cooled motor k) All Teflon Filter Housing (filter not included, optional see
below) - Flow enclosure with Heater purge controls, bubble sensor, motor cooling and purge controls.
Process Control Package
- Digital Self tuning, microprocessor based PID Temperature Controller. Membrane control panel, LED
readout. - Separate 208VAC Power Module
- Integral Process Timer
- Audio and visual alarms
- Access code.
- Nitrogen purge regulator and flow meter
Available components/services include but are not limited to:
- Process Controllers and Power Supplies
- LTFE Teflon Process Heaters
- Process Thermocouples
- Quartz or Teflon Weir
- Water Cooled Motor (SM-3) Rebuild
- LT1-3 Teflon Impeller (limited availability)
- Flow Panel
- Teflon Condensing Ring
- Filter cap, Impeller removal tools
- Various sub-components (fittings, tubing, manifolds etc. )
Future components to be offered include:
- New SM-3 Water Cooled Motor
- Dual 6" capacity LTFE High Temperature Filter Etch Bath (LTFE-6002-S/P).
- LT1-3 Teflon Impeller
New! Now available from ISE is sales and support of the Lufran / Process Technology LTFE - High
Temperature Filter Etch Bath. ISE has distributed, installed and serviced Lufran LTFE High Temperature Filter
Etch Bath's since 1993
The Lufran LTFE High Temperature Filter Etch Bath was designed for use H3P04, SC1, SC2, KOH etc. to 180
Celsius and features:
Process Control Package
Available components/services include but are not limited to:
Future components to be offered include:
Temperature Filter Etch Bath. ISE has distributed, installed and serviced Lufran LTFE High Temperature Filter
Etch Bath's since 1993
The Lufran LTFE High Temperature Filter Etch Bath was designed for use H3P04, SC1, SC2, KOH etc. to 180
Celsius and features:
- 2 ea. 4, 5 or 6" or single 8" wafer cassette capacity
- 360 degree, PFA Teflon overflow weir w/ leveling feature.
- Inner Molded PFA Teflon Tank.
- PTFE Teflon Heater with patented (patent numbers 4,553-024-4,158 764) N2 purge feature.
- 208 VAC, single phase.
- 4.5 kW Teflon Immersion Heater.
- 2 ea. J-type over-temperature thermocouple, thermal cutoff switch
- 1 ea. Teflon process thermocouple i) Liquid level sensor
- All Teflon pump with 1⁄2 hp water cooled motor k) All Teflon Filter Housing (filter not included, optional see
below) - Flow enclosure with Heater purge controls, bubble sensor, motor cooling and purge controls.
Process Control Package
- Digital Self tuning, microprocessor based PID Temperature Controller. Membrane control panel, LED
readout. - Separate 208VAC Power Module
- Integral Process Timer
- Audio and visual alarms
- Access code.
- Nitrogen purge regulator and flow meter
Available components/services include but are not limited to:
- Process Controllers and Power Supplies
- LTFE Teflon Process Heaters
- Process Thermocouples
- Quartz or Teflon Weir
- Water Cooled Motor (SM-3) Rebuild
- LT1-3 Teflon Impeller (limited availability)
- Flow Panel
- Teflon Condensing Ring
- Filter cap, Impeller removal tools
- Various sub-components (fittings, tubing, manifolds etc. )
Future components to be offered include:
- New SM-3 Water Cooled Motor
- Dual 6" capacity LTFE High Temperature Filter Etch Bath (LTFE-6002-S/P).
- LT1-3 Teflon Impeller